S&J Hardware's Linear Compensator

Rating:
100% of 100
In stock
SKU
NLC-1-223-1
As low as CA$54.97

These linear compensators are designed to direct gasses away from the shooter. The six holes are not parallel to the barrel to create a swirl effect for the gasses. The front face is also contoured to help optimize bullet stabilization.

Proudly Canadian-made by our friends at S&J Hardware in Belleville, Ontario.

  • Calibre: .223/5.56 or .308/7.62
  • Length: 2" (Standard) or 1.5" (Nano)
  • Style: Smooth or Fluted
  • All are just under 1" diameter (0.920")
  • The 5.56 is threaded for 1/2-28
  • The 9mm/40 is threaded for 1/2-28
  • The 308 is threaded for 5/8-24

Weights (including crush washer):

  • .223/5.56 – Nano (1.5") – Smooth – 93g
  • .223/5.56 – Nano (1.5") – Fluted – 90g
  • .223/5.56 – Standard (2") – Smooth – 127g
  • .223/5.56 – Standard (2") – Fluted – 120g
  • .308/7.62 – Nano (1.5") – Smooth – 80g
  • .308/7.62 – Nano (1.5") – Fluted – 77g
  • .308/7.62 – Standard (2") – Smooth – 109g
  • .308/7.62 – Standard (2") – Fluted  this version is not in production
  • 9mm/40 – PCC Standard (1.5") – Smooth – 80g
  • 9mm/40 – PCC Standard (1.5") – Fluted – 77g

You get:

  • Compensator of the chosen type/size
  • Matching crush washer

Compatible with:

  • All Mil-Spec barrel muzzle threads
  • Blued and stainless barrels
  • .223/5.56 compensators have standard 1/2x28 threads
  • .308/7.62 compensators have 5/8x24 threads
  • .308 version is not compatible with 9mm, sorry
  • The 9mm/40 IS compatible with pistol calibers

Installation Difficulty:

Wrench required for installation:

  • .223/5.56mm – 3/4" wrench
  • .30/7.62mm – 7/8" wrench
  • 9mm/40 – 7/8" wrench

Installation notes: 

While installing, remember the tapered side points AWAY from the muzzle device. Follow the handy diagram below:

Specs.
Made in CanadaYes
Write Your Own Review
You're reviewing:S&J Hardware's Linear Compensator
Your Rating