Menu
Cart 0
Gas Key Screw, Stainless

Gas Key Screw, Stainless

  • 304


For you folks who like to upgrade to stainless everything, we brought in some stainless Gas Key Screws.

These socket head cap screws hold the Gas Key in place. These are pretty important parts that you may want to stake in place to prevent loosening. Some people will seal the screws in place with gasket-seal compound or a low-strength threadlocker such as Red or Black Loc-Tite.

The threads are class '3A' which means the screw fits very tightly to the inside of the hole with minimal slop. Ordinary screws that you find at the hardware store are almost always the looser/sloppier '2A' class. For you that means these screws will locate themselves in your Bolt Carrier with dead-on-balls precision.

  • Good corrosion resistance
  • 18-8 Stainless Steel (also called 304 stainless)
  • 70,000psi tensile strength (hard as F*&K!)
  • These are the more common size #8
  • Weight: 1.36g

You get:

  • (1) Stainless Gas Key Screw

    Compatible with:

    • All mil-spec gas keys
    • All mil-spec bolt carriers 

    Installation Difficulty: 

    Tools required9/64" or 3.5mm hex key

    Installation notes: These are little guys so don't over tighten them.  I aim for 49-52 inch pounds. Some folks like to seal these screws in place, as described above, after you have confirmed that it is aligned well with the Gas Tube.



    Customer Reviews

    No reviews yet Write a review