Cart 0
Enhanced Power Extractor Spring (Canadian National Arms)

Enhanced Power Extractor Spring (Canadian National Arms)

  • 246

Similar to a standard mil-spec extractor spring except this one is extra stiff.

Recommended if you have a barrel 16" or longer, with a carbine length (9.75") gas system. The relatively shorter gas system on a longer barrel is harder on the extractor because the extraction cycle happens so fast.

Some companies offer an O-ring to prevent extractor bounce, but the rubber degrades over time, whereas this spring will last much longer being steel instead of rubber. Not recommended to use an O-ring with this spring due to overkill.

Using a stronger spring is also reported to help ensure successful extraction in these situations:
- shooting NATO pressure ammo from a dirty chamber
- shooting steel-cased ammo, where the case takes a longer time to shrink
- overgassing

This won't solve your overgassing issue, but if you like the gas level where it is and you simply want to guarantee ejection, a power spring can help.

Typically a Mil-Spec extractor spring will throw cases near 4 o'clock.  This stronger spring throws them around 2-3 o'clock.

In general, springs are wear items and degrade over time so it is wise to keep one or two extractor springs of some kind in the toolbox.

  • Ready to drop in and go
  • Mil-spec
  • Made in an ISO 9001:2008 factory
  • Spring steel construction
  • Weight: <1g
  • 4mm tall

You get:

  1. One extractor spring

Compatible with:

  • All mil-spec bolts
  • All mil-spec extractors

Installation Difficulty:

Tools required: None

Installation notes: Note the spring has a wider end. This wide end should be pressed into the cup in the Extractor.

Customer Reviews

Based on 1 review Write a review