Product Description
I bet this looks familiar; it's the last thing we touch before the trigger. This is the bare bones OEM version but she gets the job done.
You get: (1) Selector/Safety Lever Compatible with: Mil-spec AR-15, AR-10, AR-308 and compatible lower receivers Tools required: If you are replacing an existing Safety, you'll need an appropriate screwdriver to loosen your Pistol Grip in order to loosen up the pressure on the Safety Detent Spring. Installation Tips: Carefully cock the hammer, insert the safety, turn the receiver upside down and drop in the safety detent. Put the safety detent spring into the pistol grip and install the grip, ensuring the spring pops into the detent hole on the receiver without binding. With the upper removed, and while blocking the hammer from striking the receiver, test that the selector prevents discharge while set to SAFE.Product Videos
Custom Field
Brand True North Arms (TNA)
Installation difficulty 1
Exportable No
Fits Lettermail (<20mm thick) No
Small, Loose Part No
Product Reviews
1 Review Hide Reviews Show Reviews
-
Gets the job done
I needed a slew of odds and ends that didn't warrant a full purchase of a LPK and it ended up being that a safety lever was one of them.|On the fitment side of things, this is your standard mil-spec lever and drops in without a worry. The detents though are on the rough side and switching between positions is not as smooth as other safety levers. I tried spare detents as well and the issue, albeit a minor and tactile one, remained. Otherwise, a solid piece.
