Shop by Category

BCG Parts

  • Firing Pin Retaining Pin for AR15 Firing Pin Retaining Pin for AR15

    Firing Pin Retaining Pin for AR15

    Mil-spec firing pin retaining pin. This little guy does an important job by holding the firing pin in place which holds the cam pin which holds the bolt. Don't try shooting without one installed even if Uncle Elmer says it's okay. I replace these things...

    $4.11
    Add to Cart
  • CNA Extra Power Ejector Spring

    CNA Extra Power Ejector Spring

    From Canadian National Arms, a super stiff ejector spring to give you extra positive ejection. They accomplish this by winding the spring with a taller helix so the uncompressed spring is 10% longer than usual. These springs seem quite hard to find in a...

    $4.31
    Add to Cart
  • Ejector Roll Pin Ejector Roll Pin

    Ejector Roll Pin

    A mil-spec ejector roll pin made from spring steel. It is recommended that all roll pins are replaced whenever removed. They are only a buck, yet are responsible for a pretty important job. They are easy to bend or deform which will reduce their spring...

    $1.35
    Add to Cart
  • Enhanced Power Extractor Spring

    Enhanced Power Extractor Spring

    Similar to a standard mil-spec extractor spring except this one is extra stiff. Recommended if you have a barrel 16" or longer, with a carbine length (9.75") gas system. The relatively shorter gas system on a longer barrel is harder on the extractor...

    $3.19
    Add to Cart
  • Gas Ring (Split Style) Gas Ring (Split Style)

    Gas Ring (Split Style)

    This trifecta of rings is designed to create some resistance (gas seal) between the bolt and bolt carrier for some reason, likely to impart magical powers to the bolt. That, or to unload pressure on the locking lugs before the bolt is rotated out of the...

    $1.92
    Add to Cart
  • Extractor Spring Insert Extractor Spring Insert

    Extractor Spring Insert

    The Extractor Spring can't do the job alone, it needs some backup. Enter the Extractor Spring Insert. A tiny but essential little soldier for helping the spring not collapse (be more consistent and stable) while also acting as a stop for the Extractor...

    $1.92
    Add to Cart
  • Extractor Spring Donut O-Ring for AR-15

    Extractor Spring Donut O-Ring for AR-15

    Similar in function to the Extractor Spring Insert, it is a tiny little soldier for helping to stabilize the extractor spring while acting as a stop for the Extractor when wide open. It also absorbs energy to act as a mini-damper and prevent the...

    $2.27
    Add to Cart
  • Extractor Pin Extractor Pin

    Extractor Pin

    A mil-spec Extractor Pin acts as a pivot for the Extractor. The Extractor Pin is under constant shear force and is worked back and forth with every shot, so it may eventually wear out and need replacing. From a distance this may look like a roll pin,...

    $1.58
    Add to Cart
  • Extractor (fits .233/5.56 and others) Extractor (fits .233/5.56 and others)

    Extractor (fits .233/5.56 and others)

    This is a mil-spec extractor for your bolt. It is designed to work with cartridges with a 0.45" case rim thickness. 7.62x39 has a rim thickness of about 0.059" so this is not an idea replacement for the long haul, however it will work for a good while...

    $22.96
    Add to Cart
  • Ejector Ejector

    Ejector

    Mil-spec ejector for your AR-15 bolt. This will work perfectly with several calibers and should be considered a wear item that will need to be replaced from time to time. Phosphate finish Made in an ISO 9001:2008 factory Mil Spec Weight:...

    $4.57
    Add to Cart
  • Ejector Spring Ejector Spring

    Ejector Spring

    Made from spring steel, this little guy has an important job to do. Springs are wear items and degrade over time. Failure to eject could be related to this spring, though other factors are more likely. Ready to drop in and go Mil-spec Made in an ISO...

    $1.35
    Add to Cart
  • Extractor Spring Extractor Spring

    Extractor Spring

    Standard mil-spec extractor spring. Made from spring steel, this little guy has an important job to do and needs an Insert for backup. Springs are wear items and degrade over time. Failure to eject could be related to this spring, though other factors...

    $1.58
    Add to Cart
  • AR-308 Gas Ring AR-308 Gas Ring

    AR-308 Gas Ring

    This trifecta of rings is designed to create some resistance (gas seal) between the bolt and bolt carrier for some reason, likely to impart magical powers to the bolt. That, or to unload pressure on the locking lugs before the bolt is rotated out of the...

    $2.27
    Add to Cart
  • Solid Firing Pin Retaining Pin for AR-15 Solid Firing Pin Retaining Pin for AR-15

    Solid Firing Pin Retaining Pin for AR-15

    The old-fashioned design of firing pin retaining pin, for if you want an authentic retro build or maybe you believe the old ways are the best ways.You get: (1) Solid firing pin retaining pin may be black or stainless Compatible with: AR-15 bolt carrier...

    $13.06
    Add to Cart
  • Hard Chrome Firing Pin (5.56/.223/300BLK)

    Hard Chrome Firing Pin (5.56/.223/300BLK)

    Hard chrome coated stainless steel firing pin optimized for .223 and or 5.56 parent cases. It'll also work great with soft-primed commercial 7.62x39 ammo, it is not suitable for harder milsurp primers. Note that this is the original M16 version of the...

    $18.01
    Add to Cart
  • Firing Pin Stainless Steel (5.56/.223/300BLK)

    Firing Pin Stainless Steel (5.56/.223/300BLK)

    Stainless steel firing pin optimized for .223 and or 5.56 parent cases. It'll also work great with soft-primed commercial 7.62x39 ammo, it is not suitable for harder milsurp primers. Note that this is the original M16 version of the firing pin which...

    $15.81
    Add to Cart
  • Toolcraft AR-15 Cam Pin - Nickel Boron

    Toolcraft AR-15 Cam Pin - Nickel Boron

    Toolcraft is a highly regarded OEM providing high quality parts to many of the big players in the AR-15 world. Their parts are top notch and are equal to any mil-spec bolt carrier component from Colt, BCM or Daniel Defense. Why bother paying more for a...

    $20.10
    Add to Cart
  • CNA AR-308 Ejector Spring

    CNA AR-308 Ejector Spring

    You get: (1) Ejector spring Compatible with: AR-308-size boltsTools required: None Installation Tips: After installing, check that the ejector can compress all the way down by using a spent case under the ejector. If not you'll have to trim off one or...

    $6.13
    Add to Cart
  • CNA AR-308 Extractor Pin

    CNA AR-308 Extractor Pin

    If you're having extraction issues that you can't resolve sometimes the fix is to just replace the whole kit n kaboodle (extractor, spring, and pin). Also handy to have a spare for just in case.You get: (1) Extractor pin Compatible with: Most AR-308 size...

    $3.02
    Add to Cart
  • CNA AR-308 Extractor Inner Spring

    CNA AR-308 Extractor Inner Spring

    This little guy fits inside the Extractor Outer Spring.  If you're finding you need more extractor spring force, this upgrade might be just the ticket.You get: (1) Extractor Inner Spring for AR-308 bolts Tools required: Very strong fingers or a vice...

    $6.18
    Add to Cart
  • Gas Key Screw, Stainless

    Gas Key Screw, Stainless

    For you folks who like to upgrade to stainless everything, we brought in some stainless Gas Key Screws. These socket head cap screws hold the Gas Key in place. These are pretty important parts that you may want to stake in place to prevent loosening...

    $3.76
    Add to Cart
  • Solid Firing Pin Retaining Pin for AR-308

    Solid Firing Pin Retaining Pin for AR-308

    The old-fashioned design of firing pin retaining pin, for if you want an authentic retro build or maybe you believe the old ways are the best ways.You get: (1) Solid firing pin retaining pin Compatible with: AR-10, AR-308 size bolt carrier groups Tools...

    $13.56
    Add to Cart
  • Cam Pin

    Cam Pin

    Mil-spec Cam Pin to connect your bolt to the bolt carrier. It also has the job of rotating the bolt to engage/disengage with the Barrel Extension. These little guys come in all shapes and sizes but ours is the style used in an M16 style bolt meant for...

    $16.36
    Add to Cart
  • CNA AR-308 Black Nitrided Extractor (fits .308 and 6.5 Creedmoor bolts)

    CNA AR-308 Black Nitrided Extractor (fits .308 and 6.5 Creedmoor bolts)

    This particular product is a standard, run-of-the-mill AR-308 mil-spec extractor claw for your bolt. Good to have a couple of these on hand as extras, in case of breakage or launch into orbit when doing a disassembly.You get: (1) AR-308 extractor...

    $30.33
    Add to Cart