Handguard (Drop-In)

Barrel Nut, Standard

If you are building a down and dirty basic AR-15 or plan on using a Magpul fore-grip you just might need a standard OEM style barrel nut. These bad boys are threaded on and tightened with out armorer's wrenches. The ingenuity of the design...

Delta Ring Assembly for AR-15

A convenient kit of the three main parts you need to make the rear mounting for a drop-in handguard on a classic AR build.You get: (1) Anodized aluminum ring (1) Steel snap ring (1) Spring steel weld spring You need to get separately: Barrel nut...

Weld Spring for Delta Ring

The weld spring is the dealy that makes the Delta ring springy. This little guy's job is to keep forward pressure on the delta ring and thus help to retain an OEM foregrip. Blackened steel construction Mil spec Spring metal Ideal OEM...

Handguard Snap Ring

This is an OEM mil-spec snap ring to hold the delta ring + weld spring combo in place. This part has special contours and thus is not recommended to be replaced with an off-the-shelf snap ring from your local hardware store. Mil-spec blackened spring...

Handguard Slip Ring/Delta Ring

Well you've found it; the coolest item on our website. This little devil does exactly what you think it should. It will receive pressure from the weld spring on one side, retain the OEM-style 2-piece handguard on the other side, all while straddling the...

Magpul MAG586 ZHUKOV Hand Guard, AK47/AK74

Magpul MAG586 ZHUKOV Hand Guard, AK47/AK74 The Magpul Zhukov Hand Guard is a fully-featured AK forearm for the modern AK. The Zhukov Hand Guard casts aside traditional AK forearm shortcomings and offers an extended option for modern shooting techniques,...

Magpul MAG1381 ELG M-LOK Hand Guard, Marlin 1985, Forend for Lever-Action Rifle

Magpul MAG1381 ELG M-LOK Hand Guard, Marlin 1985, Forend for Lever-Action Rifle A modern forend for your lever-action rifle   The Enhanced Lever Gun (ELG) M-LOK Hand Guard is a lever-action hand guard designed to optimize the functionality...

Mesa Tactical Truckee Forend for Benelli M2 Tactical (12-GA, M-LOK, 9") [96140]

Mesa Tactical Truckee Forend for Benelli M2 Tactical (12-GA, M-LOK, 9") Truckee forends are machined from a single piece of aluminum creating a durable forend that is both sleek and rugged. All Truckee forends have industry standard...

Sun Optics Ruger 10/22 Vent. Handguard/Scope Mount, 1 Pc [SM5516]

Sun Optics Ruger 10/22 Ventilated Handguard/Scope Mount, 1 Pc  Upgrade your Ruger 10/22 with the Sun Optics Ventilated Handguard and Scope Mount. This one-piece mount ensures stability and precision for your optics and other accessories, lightweight...

DIS - TOMMY DERYA TM22 CONVERTIBLE MLOK HANDGUARD FOR DERYA TM22 P

THIS IS THE REAR SEGMENT ONLY   This handguard is designed to fit both the full length and short barrels on a Derya TM22 or RIA TM22 Feather. It’s broken into two pieces and the front section is easily removed with four bolts; the rear section...

Turkenelli M4 Aluminum Handguard

These are drop in replacement hand guards for most turkenelli m4 clones like the sulun tac 12   These replace the plastic left and right side handguard pieces with a grippy, mlok compatible 1 piece aluminum handguard    The handgaurd...

DIS - TOMMY DERYA TM22 CONVERTIBLE MLOK HANDGUARD FOR DERYA TM22

YOU GET THE REAR SECTION ONLY FOR SHORTER BARRELS   This handguard is designed to fit both the full length and short barrels on a Derya TM22 or RIA TM22 Feather. It’s broken into two pieces and the front section is easily removed with four...

TOMMY AKDAS ALCOR TACTICAL HANDGUARD WITH HEAT SHIELD

This tactical handguard is a direct fit for the Akdas Alcor. It’s made out of a nylon resin blend and is sanded/painted for a smooth finish. There are plenty of MLOK slots on the sides and bottom, and the handguard can accommodate the original...

TOMMY DERYA TM22 CONVERTIBLE QUAD RAIL HANDGUARD (FOR DERYA TM22)

This handguard is designed to fit the short barrels on a Derya TM22 or TM22 Feather. It’s broken into two pieces and the front section is easily removed with four bolts; the rear section can be used in its own when running a 10” barrel. It...

TOMMY DERYA TM22 CONVERTIBLE QUAD RAIL HANDGUARD FOR DERYA TM22

This handguard is designed to fit both the full length and short barrels on a Derya TM22 or TM22 Feather. It’s broken into two pieces and the front section is easily removed with four bolts; the rear section can be used in its own when running a...

TOMMY DERYA TM22 MLOK HANDGUARD FOR SHORT BARRELED DERYA TM-22

This short handguard is a direct fit for the Derya TM-22 and is sized for the Dlask 10” barrel, but can also be used as a shorter handguard on the standard barrel. It features plenty of MLOK slots on the sides and bottom, as well as a top rail...

TOMMY HENRY HOMESTEADER 11” MLOK HANDGUARD FOR HENRY HOMESTEADER

ommy Enterprises 11” M-LOK Handguard for Henry Homesteader This tactical 11” handguard is a direct fit for the Henry Homesteader. It’s made out of a premium nylon resin and is sanded/painted for a smooth finish. There are MLOK slots...

TOMMY HENRY HOMESTEADER FULL-LENGTH TACTICAL HANDGUARD FOR HOMSTEADER

This tactical full-length handguard is a direct fit for the Henry Homesteader. It’s made out of a premium nylon resin and is sanded/painted for a smooth finish. There are MLOK slots on the sides/bottom and two holes for a QD sling mount. Please...

DERYA TM22 11” MLOK HANDGUARD FOR DERYA TM-22 – STANDARD

This handguard is a direct fit for the Derya TM-22. It’s meant for the oem (long) barrel and pairs well with a reverse can faux suppressor. It’s made out of a durable nylon-like resin and is sanded/painted for a smooth finish. There are MLOK...

DERYA TM22 MICRO HANDGUARD FOR DERYA TM-22 – QUAD RAIL

This 4” long handguard is a direct fit for the Derya TM22. It is made out of a premium impact-resistant resin blend and is sanded/painted for a smooth finish.    FITMENT Standard TM22, RIA TM22 Feather

Mesa Tactical Remington 870 12 Gauge M-LOK Truckee Forend, 7.5" [93270]

Description: Mesa Tactical Remington 870 12 Gauge M-LOK Truckee Forend, 7.5". Machined from 6061 heat-treated aluminum, this 7.5" Truckee forend is a sleek, rugged and lightweight forend designed for Remington 870 and 870 TAC-14 shotgun models...

Mesa Tactical, Magazine Clamp w/Rail, Remington 870 12 GA

Magazine Clamp For Remington (12-GA) Mesa Tactical Magazine Clamps provide mounting points for Picatinny rails, weapon lights and sling attachments near the muzzle of a tactical shotgun. Both designs are CNC machined 6061-T6 aluminum, Type III...

TOMMY AKDAS ALCOR QUAD RAIL HANDGUARD FOR AKDAS ALCOR -

This tactical handguard is a direct fit for the Akdas Alcor. It’s made out of a nylon resin blend and is sanded/painted for a smooth finish. There are picatinnys rails on the sides, top, and bottom. This version requires you to remove the original...

TOMMY DERYA TM22 11” QUAD RAIL HANDGUARD FOR DERYA TM-22 / RIA FEATHER