Shop by Category

Parts

  • Firing Pin Retaining Pin for AR15 Firing Pin Retaining Pin for AR15

    Firing Pin Retaining Pin for AR15

    Mil-spec firing pin retaining pin. This little guy does an important job by holding the firing pin in place which holds the cam pin which holds the bolt. Don't try shooting without one installed even if Uncle Elmer says it's okay. I replace these things...

    $4.11
    Add to Cart
  • CNA Extra Power Ejector Spring

    CNA Extra Power Ejector Spring

    From Canadian National Arms, a super stiff ejector spring to give you extra positive ejection. They accomplish this by winding the spring with a taller helix so the uncompressed spring is 10% longer than usual. These springs seem quite hard to find in a...

    $4.31
    Add to Cart
  • TNA WK180-C Full-Length Charging Handle for Gen2 & WK181-C TNA WK180-C Full-Length Charging Handle for Gen2 & WK181-C

    TNA WK180-C Full-Length Charging Handle for Gen2 & WK181-C

    True North Arm's WK180-C Full-Length charging handle, is compatible with the Gen2 WK and the WK181-C. We moved the pivot point back, for a full-length design that covers the entire front slot of your gun. Now your missions in rough terrain won't be...

    $86.99
    Add to Cart
  • Enhanced Power Extractor Spring

    Enhanced Power Extractor Spring

    Similar to a standard mil-spec extractor spring except this one is extra stiff. Recommended if you have a barrel 16" or longer, with a carbine length (9.75") gas system. The relatively shorter gas system on a longer barrel is harder on the extractor...

    $3.19
    Add to Cart
  • Ejector Roll Pin Ejector Roll Pin

    Ejector Roll Pin

    A mil-spec ejector roll pin made from spring steel. It is recommended that all roll pins are replaced whenever removed. They are only a buck, yet are responsible for a pretty important job. They are easy to bend or deform which will reduce their spring...

    $1.35
    Add to Cart
  • Extractor Spring Insert Extractor Spring Insert

    Extractor Spring Insert

    The Extractor Spring can't do the job alone, it needs some backup. Enter the Extractor Spring Insert. A tiny but essential little soldier for helping the spring not collapse (be more consistent and stable) while also acting as a stop for the Extractor...

    $1.92
    Add to Cart
  • Extractor Spring Donut O-Ring for AR-15

    Extractor Spring Donut O-Ring for AR-15

    Similar in function to the Extractor Spring Insert, it is a tiny little soldier for helping to stabilize the extractor spring while acting as a stop for the Extractor when wide open. It also absorbs energy to act as a mini-damper and prevent the...

    $2.27
    Add to Cart
  • Trigger Tech AR-15 Single Stage Drop-In Trigger Trigger Tech AR-15 Single Stage Drop-In Trigger

    Trigger Tech AR-15 Single Stage Drop-In Trigger

    Introducing a brand-new line up of TriggerTech Single-Stage AR15 Triggers! The TriggerTech AR15 Single-Stage drop-in AR trigger provides a true zero-creep break, extremely short overtravel, a sub 0.030” tactical reset and offers outstanding...

    $264.99 - $369.99
    Choose Options
  • Gas Ring (Split Style) Gas Ring (Split Style)

    Gas Ring (Split Style)

    This trifecta of rings is designed to create some resistance (gas seal) between the bolt and bolt carrier for some reason, likely to impart magical powers to the bolt. That, or to unload pressure on the locking lugs before the bolt is rotated out of the...

    $1.92
    Add to Cart
  • Extractor Pin Extractor Pin

    Extractor Pin

    A mil-spec Extractor Pin acts as a pivot for the Extractor. The Extractor Pin is under constant shear force and is worked back and forth with every shot, so it may eventually wear out and need replacing. From a distance this may look like a roll pin,...

    $1.58
    Add to Cart
  • Ejector Spring Ejector Spring

    Ejector Spring

    Made from spring steel, this little guy has an important job to do. Springs are wear items and degrade over time. Failure to eject could be related to this spring, though other factors are more likely. Ready to drop in and go Mil-spec Made in an ISO...

    $1.35
    Add to Cart
  • TNA Bolt Carrier Group (5.56 Bolt) BCG M16 cut TNA Bolt Carrier Group (5.56 Bolt) BCG M16 cut

    TNA Bolt Carrier Group (5.56 Bolt) BCG M16 cut

    Don't let the low price scare you, this is a quality part that gets the job done. 5.56 Bolt Ready to drop in and go Mil-spec Nitride finish You get: Assembled bolt carrier group (BCG), ready to drop in Compatible with all AR15/M16 upper...

    $207.44
    Add to Cart
  • Extractor (fits .233/5.56 and others) Extractor (fits .233/5.56 and others)

    Extractor (fits .233/5.56 and others)

    This is a mil-spec extractor for your bolt. It is designed to work with cartridges with a 0.45" case rim thickness. 7.62x39 has a rim thickness of about 0.059" so this is not an idea replacement for the long haul, however it will work for a good while...

    $22.96
    Add to Cart
  • Ejector Ejector

    Ejector

    Mil-spec ejector for your AR-15 bolt. This will work perfectly with several calibers and should be considered a wear item that will need to be replaced from time to time. Phosphate finish Made in an ISO 9001:2008 factory Mil Spec Weight:...

    $4.57
    Add to Cart
  • Extractor Spring Extractor Spring

    Extractor Spring

    Standard mil-spec extractor spring. Made from spring steel, this little guy has an important job to do and needs an Insert for backup. Springs are wear items and degrade over time. Failure to eject could be related to this spring, though other factors...

    $1.58
    Add to Cart
  • CNA “Gatling Gun short” Style, Micro AR-15 Slip Over Barrel Shroud with Multi-Port Muzzle Brake CNA “Gatling Gun short” Style, Micro AR-15 Slip Over Barrel Shroud with Multi-Port Muzzle Brake

    CNA “Gatling Gun short” Style, Micro AR-15 Slip Over Barrel Shroud with Multi-Port Muzzle Brake

    CNA AR-15 Micro Slip Over Barrel Shroud with Multi-Port Brake is a dual purpose unit that functions as, you guessed it - a barrel shroud and a muzzle brake. Not only is it multi-functional, this device will reduce your felt recoil up to 70%. Made...

    $68.87
    Add to Cart
  • Wolff SKS Rifle Performance Pak, 7.62x39mm Wolff SKS Rifle Performance Pak, 7.62x39mm

    Wolff SKS Rifle Performance Pak, 7.62x39mm

    Wolff Gunsprings SKS Rifle Service Pak,  7.62x39mm. Contains 1 each reduced power hammer spring rated at 27.5 pounds (original hammer springs range from 33-36 pounds) and 1 each reduced power sear/magazine can latch spring to improve trigger. All in...

    $17.39
    Add to Cart
  • SALE
    LTAC RAVEN 5.56 *GOLD TNA PRO* Builder Kit + Talon Ambi Modular Top Charging Handle + *FREE* TNA Branded 5/30 PMAG, Non Restricted LTAC RAVEN 5.56 *GOLD TNA PRO* Builder Kit + Talon Ambi Modular Top Charging Handle + *FREE* TNA Branded 5/30 PMAG, Non Restricted

    LTAC RAVEN 5.56 *GOLD TNA PRO* Builder Kit + Talon Ambi Modular Top Charging Handle + *FREE* TNA Branded 5/30 PMAG, Non Restricted

    Convert your AR 15 platform to a Non-Restricted (if you have a long barrel) with Lockhart Tactical's Raven 5.56 Builder Kit! *FREE TNA BRANDED PMAG WITH EVERY ORDER* This is the special TNA GOLD PRO EDITION which includes: Lockhart Tactical RAVEN GOLD...

    Was: $1,479.99
    Now: $1,399.99
    Add to Cart
  • AR-308 Gas Ring AR-308 Gas Ring

    AR-308 Gas Ring

    This trifecta of rings is designed to create some resistance (gas seal) between the bolt and bolt carrier for some reason, likely to impart magical powers to the bolt. That, or to unload pressure on the locking lugs before the bolt is rotated out of the...

    $2.27
    Add to Cart
  • Hard Chrome Firing Pin (5.56/.223/300BLK)

    Hard Chrome Firing Pin (5.56/.223/300BLK)

    Hard chrome coated stainless steel firing pin optimized for .223 and or 5.56 parent cases. It'll also work great with soft-primed commercial 7.62x39 ammo, it is not suitable for harder milsurp primers. Note that this is the original M16 version of the...

    $18.01
    Add to Cart
  • CNA AR-15 "HorkFIRE" Style Muzzle Comp With QD Blast Shield CNA AR-15 "HorkFIRE" Style Muzzle Comp With QD Blast Shield

    CNA AR-15 "HorkFIRE" Style Muzzle Comp With QD Blast Shield

    CNA AR-15 Muzzle Comp with QD Blast sheild will effectively reduce your felt concussion in close-quarters. Muzzle brake and blast sheild is constructed of steel and completed with a nitride finish for added strength.0 Designed for .223/5.56 rifles...

    $139.97 - $199.57
    Choose Options
  • CNA AR-15 Fake Can/Suppresor, 1/2"-28,  Anodized Black, 3.0" Length

    CNA AR-15 Fake Can/Suppresor, 1/2"-28, Anodized Black, 3.0" Length

    Suppressors aren't legal (for now...) but you can still get the look with this fake can. Functions as a barrel shroud, this fake can is constructed from T6 Aluminum, and completed with an Andozided black finish. Adding on only 2.25" to your barrel length...

    $69.97
    Add to Cart
  • Firing Pin Stainless Steel (5.56/.223/300BLK)

    Firing Pin Stainless Steel (5.56/.223/300BLK)

    Stainless steel firing pin optimized for .223 and or 5.56 parent cases. It'll also work great with soft-primed commercial 7.62x39 ammo, it is not suitable for harder milsurp primers. Note that this is the original M16 version of the firing pin which...

    $15.81
    Add to Cart
  • Solid Firing Pin Retaining Pin for AR-15 Solid Firing Pin Retaining Pin for AR-15

    Solid Firing Pin Retaining Pin for AR-15

    The old-fashioned design of firing pin retaining pin, for if you want an authentic retro build or maybe you believe the old ways are the best ways.You get: (1) Solid firing pin retaining pin may be black or stainless Compatible with: AR-15 bolt carrier...

    $13.06
    Add to Cart