GET A FREE GIFT WITH YOUR ORDER WHEN YOU PAY WITH EMAIL MONEY TRANSFER!

Shop by Category

New Arrivals

  • TNA Go/No-Go Gauges (SAAMI-Spec)

    TNA Go/No-Go Gauges (SAAMI-Spec)

    If you are doing any sort of build you really should check and verify the headspace before you go to the range. It's becoming ever more difficult to get these gauges as they are precision tools so we took matters into our own hand. We contacted a...

    $63.11
    Choose Options
  • The SNEK Bore Cleaning Snake The SNEK Bore Cleaning Snake

    The SNEK Bore Cleaning Snake

    This is the simplest bore cleaning methodology. You simply feed the weighted rope in through the chamber so it follows the same path as the bullet. Put bore cleaner on the wire brush portion and oil on the fatter end loop and you're done in one pull! The...

    $10.55
    Choose Options
  • Tapco Vertical Grip Tapco Vertical Grip

    Tapco Vertical Grip

    A simple vertical foregrip for increased control of your boomstick. You get about 4" of vertical grabbing room. Picatinny clamps gets real loose to make installation easy (no jamming it on the end of the rail) Uses 2.38" of rail space 1.5" grip...

    $33.11
    Choose Options
  • Takedown Pin Detent Retention Mod Kit

    Takedown Pin Detent Retention Mod Kit

    The Takedown Pin Detent & Detent Spring can easily slip out from under the End Plate and launch across the room when installing or changing the buttstock. You can stop this from happening simply by tapping (making threads in) the spring/detent hole,...

    $20.63
    Add to Cart
  • Takedown Pin

    Takedown Pin

    Your Upper is held in place by pins in the Lower at the front and the rear; this little fella is for the rear and it is the shorter of the two pins. It has a round shape but still can only go in one way due to the detent track. If you are frequently...

    $7.79
    Add to Cart
  • Tactical Latch for Charging Handle Tactical Latch for Charging Handle

    Tactical Latch for Charging Handle

    All-steel oversized charging handle latch for AR-15 or M16. A quick and easy upgrade to your charging handle.   Black Oxide finish Charging handle NOT included Weight: 15g Thumb contact area is 16 x 16 mm You will need a small punch to install...

    $13.17
    Add to Cart
  • SureFire SOCOM Mock Suppressor/Trainer SureFire SOCOM Mock Suppressor/Trainer

    SureFire SOCOM Mock Suppressor/Trainer

    The SureFire Suppressor Trainer mimics the length, weight, and attachment of a SOCOM556-RC or SOCOM556-RC2 suppressor (5.56 version) or SOCOM762-RC or SOCOM762-RC2 suppressor (7.62 version). Works with marking cartridges like Simunition FX, training...

    $445.11
    Choose Options
  • Super M-LOK Handguard (Easy-Install) Super M-LOK Handguard (Easy-Install)

    Super M-LOK Handguard (Easy-Install)

    This is a low-profile, lightweight M-LOK handguard for the AR-15/M16 platform. It is a free-float clamp-on design that looks freaking bada$$. You get a Picatinny rail on top and 3 MLOK rails on the sides/bottom. It is a 1-piece design that requires the...

    $115.75 - $166.92
    Choose Options
  • Stainless Hammer Spring

    Stainless Hammer Spring

    If you want your hammer to do something when you pull the trigger you'd better have a hammer spring. These guys see a lot of use and should be considered a wear item every few thousand rounds. These are standard rate springs and are plenty strong enough...

    $6.84
    Add to Cart
  • Stainless A2-Style Birdcage Flash Hider (5 Slots) Stainless A2-Style Birdcage Flash Hider (5 Slots)

    Stainless A2-Style Birdcage Flash Hider (5 Slots)

    This is the classic A2 birdcage muzzle device made in Stainless Steel. Not much else to say; this is designed to hide flash, not reduce recoil.  The bottom area is solid to reduce dust kick-up when shooting prone. If you want a really old-school look and...

    $39.13 - $40.23
    Choose Options
  • Spare Set Screw for TNA Steel Gas Blocks (M5x0.8) Spare Set Screw for TNA Steel Gas Blocks (M5x0.8)

    Spare Set Screw for TNA Steel Gas Blocks (M5x0.8)

    So you lost one of the set screws out of your gas block. It happens, that's why we've got spares for you. Next time don't back the screw out all the way, you can get away (easy) with keeping the tip in, no one will notice (this might not be a good...

    $1.82 - $1.92
    Choose Options
  • SALE
    Spare Barrel Nut for Free-Float  Handguard (easy-install and coronus)

    Spare Barrel Nut for Free-Float Handguard (easy-install and coronus)

    So you've in some way messed up the special barrel nut for your free float barrel. That's OK , We've got you covered. These bad boys are tightened with a 1-1/16" crow foot wrench. The gas tube doe not interact with this barrel nut. Blackened...

    Was: $31.43
    Now: $25.11
    Add to Cart
  • Smooth Muzzle Thread Protector (Stainless) Smooth Muzzle Thread Protector (Stainless)

    Smooth Muzzle Thread Protector (Stainless)

    This is a stainless steel thread protector for the end of your barrel if you don't want a flash hider or muzzle accessory. Some of our customers use this between muzzle devices, or simply to look different. Smooth exterior Diameter 0.73" Weight...

    $26.37
    Choose Options
  • Sling Stud Mount for Picatinny Rail Sling Stud Mount for Picatinny Rail

    Sling Stud Mount for Picatinny Rail

    This is a sling stud compatible with your favorite Picatinny or Weaver rail. The stud is made of steel, the rest is anodized aluminum. Great for adding a bipod to an AR-15 or any other firearm with a rail section. simple slotted fastener with have you...

    $15.92
    Add to Cart
  • SKS Recoil Buffer SKS Recoil Buffer

    SKS Recoil Buffer

    These Recoil Buffer Pads are designed to prevent the slide from contacting the frame during recoil. They slide over the recoil spring guide, between guide and spring. Made of high strength Polyurethane they are compatible with pretty much all SKS type...

    $6.14
    Add to Cart
  • Shoulderless Muzzle Thread Adapter (1/2"-28 to 5/8"-24) Shoulderless Muzzle Thread Adapter (1/2"-28 to 5/8"-24)

    Shoulderless Muzzle Thread Adapter (1/2"-28 to 5/8"-24)

    These muzzle thread adapters are handy for the end of your barrel if you for some reason want to install a larger muzzle device on your barrel (might save you from buying multiple muzzle devices) or you've got a weird thread that you need converted to a...

    $28.44 - $32.48
    Choose Options
  • Shim Kit for Muzzle Devices (AAC)

    Shim Kit for Muzzle Devices (AAC)

    This kit of shims from Advanced Armament in the USA is an alternative to using a crush washer to correctly orient your muzzle device. 1/2" version - 0.750" OD × 0.500" ID 5/8" version - 0.750" OD × 0.625" ID Included shims: 0.008" white 0...

    $21.97
    Choose Options
  • Set Screws for Takedown Pin Detent Retention Mod

    Set Screws for Takedown Pin Detent Retention Mod

    The Takedown Pin Detent & Detent Spring can easily slip out from under the End Plate and launch across the room when installing or changing the buttstock. You can stop this from happening simply by tapping (making threads in) the hole, and installing...

    $1.92
    Add to Cart
  • SALE
    Scope Bubble Level, Scope Ring-Mounted Scope Bubble Level, Scope Ring-Mounted

    Scope Bubble Level, Scope Ring-Mounted

    ***********FINAL SALE************* This is a level attachment for your favorite set of rings the ones that you likely paid a lot for. This assembly replaces the screws that hold the top of your rings to the bottom. If you are doing longer range...

    Was: $29.34
    Now: $9.77
    Choose Options
  • SALE
    Scope Bubble Level (30mm) Scope Bubble Level (30mm)

    Scope Bubble Level (30mm)

    ***********FINAL SALE************* This is a level attachment for your favorite 30mm scope. Attach this directly to your scope and be confident that your rifle is sitting level. An angled firing position can result in a missed target downrange. Help...

    Was: $22.85
    Now: $9.77
  • SALE
    Scope Bubble Level (25.4mm, 1") Scope Bubble Level (25.4mm, 1")

    Scope Bubble Level (25.4mm, 1")

    ***********FINAL SALE************* This is a level attachment for your favorite 1-inch scope. Attach this directly to your scope and be confident that your rifle is sitting level. An angled firing position can result in a missed target downrange...

    Was: $20.87
    Now: $9.77
    Add to Cart
  • Safety Selector Detent Spring

    Safety Selector Detent Spring

    That rewarding CLICK! when we move from safe to fire. This little spring makes that dream a reality. Make sure she stays strong, a weak spring here might mean that your firearm has a mind of its own when it comes to staying in safe mode. Looks very...

    $1.81
    Add to Cart
  • Safety Selector Detent Safety Selector Detent

    Safety Selector Detent

    Every time you move your safety from "Safe" to "Play" you hear a click. It's this little guy snapping into the bottom of the detent hole in the selector. Besides that there isn't much to say. It's installed pointy side towards the safety selector...

    $2.96 - $4.11
    Choose Options
  • Rubber Strap Wrench

    Rubber Strap Wrench

    This simple tool can be handy for getting a hold of something that doesn't work well with a wrench, or if you don't have the right specialty wrench for your rail. Sometimes the simplest dirtiest tool will solve your problem. It's like having a wrench...

    $14.27
    Choose Options
GET A FREE GIFT WITH YOUR ORDER WHEN YOU PAY WITH EMAIL MONEY TRANSFER!