382 results for fake cans

Handguard Snap Ring

This is an OEM mil-spec snap ring to hold the delta ring + weld spring combo in place. This part has special contours and thus is not recommended to be replaced with an off-the-shelf snap ring from...

TNA Alcor 223 Muzzle Thread Alignment Helper Tool

So you bought an Alcor 223 and found that the muzzle is not threaded. Bummer You also find that the super tall and strange front site is not needed when you run an optic so it's not needed.   We've...

TNA Henry Homesteader Muzzle Thread Alignment Helper Tool

So you bought a Henry Homesteader and found that the muzzle is not threaded. Bummer You also find that the super tall and strange front site is not needed when you run an optic so it's not needed...

Jam Nut for Muzzle Device, Hex

These are useful for timing (positioning) muzzle devices if you want to be able to adjust the position without using crush washers. With a wrench or two you can adjust your muzzle device multiple...

Magpul MAG056-BLK MIAD/MOE AA/AAA Battery Storage Core

Internal core unit for the MIAD as well as the MOE, MOE+, MOE-K2, and MOE AK Grips designed to hold two (2) AA type batteries in a self contained, water resistant unit. Included internal spacer...

S & J Hardware Remington 870 Tactical Jumbo Safety

S&J Hardware Remington 870 Tactical Jumbo Safety. Jumbo enough, you can even wear your gloves while operating. The ergonomic design allows you to feel the safety and its current condition very easily...

SureShell Polymer Carrier for Rem V3, 12ga, 6-Shell [96090]

96090 : SureShell Polymer Carrier for Rem V3 (6-Shell, 12-GA) SureShell shotshell carriers are assemblies comprising an aluminum yoke and backing plate and a Santoprene® elastomer tube. The shells...

Fortis Manufacturing, Inc., Muzzle Brake, 5.56MM, Black Finish, Fortis Control Compatible

LimbSaver Magpul Stock Recoil Pad

LimbSaver Magpul MOE SL Stock Recoil Pad If you're searching for the ultimate accessory to improve your AR's performance, look no further than this advanced Magpul Stock Recoil Pad from LimbSaver,...

Firing Pin Retaining Pin for AR15

Mil-spec firing pin retaining pin. This little guy does an important job by holding the firing pin in place which holds the cam pin which holds the bolt. Don't try shooting without one installed even...

Troy Industries HK-Style Front Folding Battle Sight

Durability and dead-on accuracy make Troy BattleSights™ the hands-down first choice of Special Ops and Tactical Users Worldwide. Troy’s HK Front Folding BattleSight is easy to install and deploy,...

TNA Pmag Monopod

Are you one of those people who uses a 30 rounder mag as a monopod sort of thing when shooting from the bench? Well if so thing might be for you. It features a rounded body for pitch changes but is...

Radian Raptor LT Ambidextrous Charging Handle (308 AR-10 SR25)

Meet the newest member of the Radian family: Raptor-LT. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type...

Magpul MAG493 Forward Sling Mount for Mossberg 590A1

The Forward Sling Mount is a sling attachment point for the Mossberg 590A1 series of shotguns which clamps onto the barrel and magazine tube. Designed specifically for the A1's heavy-walled barrels,...

Troy Industries M4 Folding BattleSight (Front)

Durability and dead-on accuracy make Troy BattleSights™ the hands-down first choice of Special Ops and Tactical Users Worldwide. Troy’s M4 Front Folding BattleSight is easy to install and deploy,...

MDT GRND-POD Bipod Picatinny (Black)

The MDT GRND-POD Bipod was designed to maximize versatility, as well as cost savings, while retaining features that we, through your feedback, knew to be most important in a precision rifle bipod...

MDT Oryx Bipod with M-LOK Attachment (Gray)

MDT’s Oryx Bipod delivers unmatched rigidity, strength, and stability. It utilizes polymer blend construction, allowing the Oryx Bipod to easily withstand heavy field use without adding any...

BALLISTOL SPRAY 520 ML ANNIVERSARY EDITION

Ballistol Oil is for maintaining of metal, wood, leather, rubber, synthetic material, skin, animals' coat and much more. Ballistol Oil is ideally suited for handicraft, industry, agriculture,...

TNA AD-500 Muzzle Thread Alignment Helper Tool

So you bought an AD-500 and found that the muzzle is not threaded. Bummer You also find that the super tall and strange front site is not needed when you run an optic so it's not needed.   We've got...

Front End Cap for Free-Float Handguard

***FINAL SALE*** This is the end cap that can work be installed with regular-sized (non-"lightweight") free-float handguards to close off the front of the rail if so desired. Anodized aluminum...

Magpul MAG055-BLK MIAD/MOE CR123A Battery Storage Core

Internal core unit for the MIAD® as well as the MOE®, MOE-K2®, and MOE® AK Grips* designed to hold two (2) CR123A lithium type batteries in a self contained, water resistant unit. Rubber cap is...

TNA Steel Low-Profile Gas Block, 0.75"

Our most popular gas block is a real workhorse. Holds up to any and all abuse that you can throw at it.Features: For use with a 0.750" barrel and standard gas tube of any length Securely fastens to...

Wheeler Engineering Level-Level-Level, Scope Crosshair Leveling Tool

The Wheeler Engineering Level-Level-Level is simplicity at its finest. If leveling and zeroing your scope makes you sweat and swear, this tool will be your best friend. Misaligned crosshairs will...

TNA Single Point Bungee Rifle Sling

Our Single point, double bungee sling is constructed of High Density Nylon webbing material tested to hold up to 150 lbs. It features multiple lengths for greater mobility & weight adjustment. Best...

Charging Handle with Ambi Tactical Latch

This is a mil-spec charging handle assembly our ambi latch preinstalled. These handles drop right into your upper just as you'd expect. Now all your lefty friends can play too!. These latches also...

S & J Hardware Type 2 - No Jam Magazine Follower for 12ga

S & J Hardware Type 2 - No Jam Magazine Follower for 12 gauge shotguns.  This mag follower is very well known for shotgun shooters. Very reliable, and will not break down or crack. Can withstand...

Adapter Mount SureShell Carrier (6-Shell, 12 GA) [90380]

90380 : Adapter Mount SureShell Carrier (6-Shell, 12 GA) Traditional on-gun shell holder solutions require alterations to the shotgun. To make things simpler for users of our telescoping stock...

magpul MAG549 - PMAG 5 7.62 AC – AICS Short Action

The PMAG 5 7.62 AC is a reliable and durable polymer magazine for .308 Winchester-based family of cartridges and is compatible with short action AICS-spec bottom metal, to include the Bolt Action...

External Bolt Catch Release for WK180-C GEN 1 Rifle

Replaces parts (L-7) and (L-8) on all Gen 1 WK180C rifles.  Will allow the user to engage or disengage the bolt catch at will.   The WK180-C Rifle   The WK180-C is designed and manufactured in Canada...

Castle Nut Wrench for Old-Style Castle Nuts

Yes it's a light, small, simple wrench only designed for your buttstock/buffer tube castle nut. If you want a lightweight tool for that nut, this will hardly be noticed in your equipment bag. This is...

Safety Selector Detent Spring

That rewarding CLICK! when we move from safe to fire. This little spring makes that dream a reality. Make sure she stays strong, a weak spring here might mean that your firearm has a mind of its own...

UMAREX T4E hdp Rubber Balls .50 Cal, Black, 250 CT

Umarex T4E Rubber Balls .50 Cal, Black, 250 CT T4E .50 caliber rubber training ammo allows you to get in some valuable practice with your .50 caliber T4E TR50 or .50 caliber T4E Practice 2 Protect...