Product Description
******* BLEMISHED Barrel extension colour may be different and gas port was drilled and may have burr******
This is a finished AR-10 barrel in 308 Winchester. Made in America by our friends that also supply big name companies.
Note this will not work on an AR-15 platform ;)
- Button Rifling
- Uses a 15 1/8 rifle length
- Made in the USA
- You get:
- One barrel with Barrel Extension pre-installed
Compatible with:
- AR-10, stripped uppers
- BCL102 uppers
- Stag10 uppers
- 0.750" gas blocks
- Muzzle devices with 5/8"-24 muzzle threads
- Standard AR10 bolt carrier groups (you need to verify headspace to be safe)
- Mil-spec barrel nuts (OEM and free-float grip nuts)
NOT Compatible with:
- AR-15, maccabee, arts modern sporter stripped uppers
Installation Difficulty:
Tools required: For the barrel itself, none but to get it installed and working you should have the Armourers tool and a vice block.
Installation notes: You will need a gas tube of the correct length. Besides that, Youtube is your friend, and it is highly recommended to check the headspace.
These barrels should be broken in. Doing so will help your barrel perform consistently over its lifespan. How to break in your new barrel:
- Clean the bore thoroughly before firing for the first time.
- Fire 5 rounds, then clean the bore.
- Repeat step #2 three more times.
- Check that the gas block is still securely fastened.
- Inspect the bolt for signs of wear.
- Check that your handguard is still nice and tight
- Fire 25 rounds, the clean the bore.
- Repeat step #7 three more times.